Moving up a size is part of the fun, as long as you don't rush it. Make too big a jump, and the new toy ends up at the back of the drawer. Here is a simple method to progress gently, with tools to check before you order: the 3D size simulator and printable templates.
La règle : 1 cm de diamètre en plus, 1,5 cm au maximum
C’est le diamètre qui fait la difficulté, bien plus que la longueur : un gode ne s’insère pas forcément en entier, alors que son diamètre, lui, ne se négocie pas. Pour progresser, comparez le diamètre à mi-hauteur, comme indiqué sur nos fiches, et visez 1 cm de plus que votre jouet actuel, 1,5 cm au maximum : c’est en général un saut d’une taille, deux au plus (de S à M, ou jusqu’à L). Cela paraît peu, mais la circonférence augmente d’environ 3 cm pour chaque centimètre de diamètre gagné.

Step 1: measure what you use today
Take the toy you are comfortable with and measure its diameter at the widest point. Also note its insertable length. These are your two reference points. On our product pages, each size shows four measurements: total length, insertable length, diameter and circumference.

Step 2: compare in the 3D size simulator
On each product page, below the size selection, the “3D size simulator” button opens a comparison window. There you will find:
- all the sizes of the model displayed at the same scale, next to a bank card for reference;
- un champ pour saisir les dimensions de votre jouet actuel : il apparaît en pointillé sur la taille sélectionnée et dans la coupe ;
- a comparison with another model, placed right next to it, at the same scale;
- a cross-section of the toy: by moving the slider, you can read the diameter at each depth of penetration;
- a display in centimeters or inches.
The cross-section is especially useful: two toys with the same maximum diameter are not alike if one is wide right from the head and the other only at the base. You will also find the simulator and our advice on the page Which dildo size should you choose?

Step 3: print the template
In the simulator, each size offers a “Life-size A4 template”: a PDF to print at 100%, with no scaling. Place your current toy on it, or cut out the outline: seeing the actual size on paper avoids a lot of surprises.

Compare measurements, not letters
The same letter does not correspond to the same measurement from one model to another. In size S, The Classics measure 4.6 cm (1.8 in) in diameter, the Fat Boy 5.1 cm (2 in) and the King Balls 5.9 cm (2.3 in). Switching from one model to another while keeping the same letter can therefore be a real jump. Conversely, changing models can sometimes help you find the missing intermediate step.
Models designed for progression
- The Beginner : very smooth, available in four very gradual sizes, to progress while keeping the same profile.
- The Unicorn : a tapered spiral whose diameter almost doubles from the tip to the base. The progression happens on one and the same toy.
- The Fat Boy : short, wide and oval in cross-section, it is all about diameter, with no unnecessary length. Eight sizes, from S to Legendary Size.
- The DeepTrainer : long, slim and ringed, it is designed for depth rather than diameter. Its rings serve as markers to progress centimeter by centimeter.
Adjust the firmness to the new size
As you move up in size, the recommended firmness changes: the bigger a toy, the softer it should be. Before ordering, check the “Which firmness for which size?” chart in our guide to finishes and firmness levels, as well as the advice given on the model's product page.
Is the step too big? Ask for an intermediate size
If the gap between two standard sizes seems too big, the “Custom” badge on most product pages lets you request a custom size: the model is scaled up or down from our original files, and we make a mold just for you.

Good habits when trying it out
- Use plenty of water-based lubricant, the only type to use with a silicone toy.
- Start with your usual size before moving on to the new one.
- Take your time: if it is not enjoyable, stop and try again another day. There is no rush.
A question about a size or a model? Write to us: we answer from our workshop in Valence, France. Our contact details are on our contact page.




