Choosing a dildo size is about more than just a letter. Here is our method, with the 3D size simulator and printable templates to check before you order.

Diameter matters more than length

A dildo is not necessarily inserted all the way: that is why the diameter is the first thing to look at. For each size, every product page lists four measurements: the total length, insertable length, the diameter and the circumference.

Start from a toy you know

The most reliable reference is a toy you already own: measure its diameter at the widest point. To progress, aim for 0.5 to 1 cm (0.2 to 0.4 in) more than your current maximum, no more.

How to measure without calipers

Two simple methods:

  • with a sewing tape measure : measure around the toy at its widest point. This gives you the circumference; divide it by 3.14 to get the diameter. Example: a circumference of 15.7 cm (6.2 in) corresponds to a diameter of 5 cm (2 in). Without a tape measure, wrap a strip of paper or a piece of string around the toy, mark where it meets, then lay the strip flat and measure it with a ruler;
  • with just a ruler : lay the toy flat against the ruler and read the width at the widest point, looking straight down from above.

Our product pages give both the diameter and the circumference: you can compare your tape-measure reading directly.

Compare measurements, not letters

Our models come in up to eight sizes: S, M, L, XL, 2XL, 3XL, 4XL and Legendary Size. But the same letter does not correspond to the same measurement from one model to another. Two examples taken from our product pages:

  • in size S, the Missile measures 17 cm (6.7 in) with a diameter of 4.1 cm (1.6 in); the King Balls, 17.5 cm (6.9 in) with 5.9 cm (2.3 in). Almost the same length, but a 1.8 cm (0.7 in) difference in diameter;
  • still in size S, The Classics measure 16.5 cm (6.5 in) with a diameter of 4.6 cm (1.8 in), while the Fat Boy measures 11.6 cm (4.6 in) with 5.1 cm (2 in): shorter, but wider.

The 3D size simulator

It displays all the sizes of a model at the same scale, next to a bank card. Enter the dimensions of your current toy, or place another model next to it to compare. Here, the simulator opens on The Classics: to see another model next to it, at the same scale, use the simulator's “Compare with another model” section; for the full simulator of another model, use the “3D size simulator” button on its product page.

Open the simulator in full screen

Printable templates

Each size has its own life-size PDF template in A4 format. Print it at 100%, without “fit to page”, and place your current toy on it.

See all PDF templates, by model and by size

What about firmness?

It is chosen according to the size: refer to the “Which firmness for which size?” chart in our guide to finishes and firmness levels.

None of the sizes suit you?

On most models, the “Custom” badge on the product page lets you request a custom size : we then make a mold just for you. And for a shape that does not exist in the catalog, there is always the custom creation.